Saturday, July 6, 2019

"Jenga" Coasters

So...

If you follow my blog, you know that I made this plant stand using the faux "Jenga" game from the Dollar Tree.

They call it "Tumbling Towers."

Since I had only used a few of the 36 pieces, I kept thinking about what I could make with the rest of them and it hit me in the middle of the night...

COASTERS!

Yep... I made coasters using materials that I already had.

Here's how it all went down.


I grabbed my Gorilla Wood Glue (the best, the best, the best!!!), the game pieces, parchment paper, cork, rubber bands, and polyurethane spray paint.  I had all of these on hand, so there was no additional out of pocket costs.


I laid out a piece of the parchment paper, secured at the edges with washi tape.  This is a great way to glue items and not worry about them sticking to your work surface, especially when there is the chance of glue seeping out.


I had formulated this layout in my mind, knowing the dimensions of the pieces from the plant stand project.

I dry fit them and made piece exchanges as needed.  Not all the pieces are perfect, so this was important for creating as square a coaster as possible.


I separated them into like configurations, so that the gluing part would be systematic.


I spread a bit of the glue on one edge and used my finger to smooth it out on as much of the wood piece.


I lined it up with a second piece and squeezed it together.

These pieces are VERY lightweight, so there was no chance of it not making a strong hold


I did however, make sure that the edges of the glued pieces were as flush with each other as possible. 

This would allow for all the pieces to fit as tight together when it was all done.



I glued the "four" sections first.

I made sure that they were flat on top and flush on the sides.


I then glued  the sections together, making sure they too were even and flush.


You can see above that all the seams were straight shots when glued, and that there was very little space between them.


I used a large thick rubber band (thanks to the USPS) as a clamp around the whole coaster.

I let it dry for a few hours.


On the underside of the coaster, I noticed that there were a few gaps (uneven pieces), but it wouldn't matter in the end.

I repeated those steps with the second coaster.


Once it was dry, I removed the rubber bands.


I traced each coaster over a piece of think cork that I had in my craft stash.


Using a pair of scissors and a craft knife, I cut those pieces out.  I found that the scissors worked a bit better than the craft knife.


I made sure to dry fit the cork with the coaster, trimming any overage and cleaning up any cork bits and raw edges.


I marked the first coaster and cork slab with a 1 so that I could adhere the exact piece I dry fit.  

I didn't want to chance that the coasters were exact.


I marked the second one with a 2 for the exact same reason.


I used a spray polyurethane to coat the top and sides of the coasters.


Here's the first coat.  It really kept the wood a natural color, BUT it brought out the darker parts of the pine as well.


I did a light sanding in between the coats of poly.  I coated it 3 times, letting it dry in between coats.


I applied a generous amount of the wood glue to the back of each coaster.


Using my finger, I "buttered" the back side all the way to the edges.


I dropped the coordinating piece of cork on top and moved it till it was perfectly even on all four sides.

I repeated that with the other coaster and let them both dry.

And here they are...


These coasters are making the trip to Californa as they will be a perfect decor item for the BoHo chic apartment we are decorating for darling daughter.

(I will do an apartment post once I have all those pictures!)


I know there are so many different ways to create these coasters from that one game.

You will need 2 of those games to create 4 coasters in all.  Each coaster uses 10 pieces.

You could paint these with chalk paint, rough them up, add a glaze, and then wax them and they would be the perfect "farmhouse decor" coasters.

If you stained each piece with different by coordinating stains, you could create "industrial decor" coasters.

Image each piece painted with coordinating bright colors for a "tropical decor" theme?

You could also use them at a wedding or shower.  Have guests write their name on them then create your coasters.  Coat with poly and you have coasters that remind you of your wedding or shower.

The ideas a literally endless...

and so so affordable!





Tuesday, July 2, 2019

Baskets For A Cause

As a retired teacher, I've taught thousands of children.  Most of them were middle schoolers, and despite the reputation of middle schoolers in general, I did love every single one of them.

However, over the years, as most teachers will tell you, there are a few who seem to become a part of your heart as well.

These are the ones that you become close to and as they grow and mature, you are still an important part of their lives too.

This is case with my Troy.

Photo Credit: Christina Haynes (Troy's mom)
This 18 year old, immensly talented both on and off the sports field, is fighting the greatest fight of his life.  A rare kidney cancer that's required he and his parents to travel to MD Anderson in Houston, TX for the chance to participate in a clinical trial to cure him

I can't write much more because this is hard enough to put down on paper, but I do ask that if you are a praying person, please add this to your prayers.

Now, onto the reason for this post...

A fundraiser with a silent auction is coming up, so I created 3 baskets to be auctioned in the effort to raise money for Troy's care.

Here's how easy it was.


I first gathered several products from the Young Living line of essential oils and self-care.

I had several products in my stash, so it was easy to coordinate different "themes" for each basket.

The one above was centered around hair care.


This basket had a skin care theme.


While this basket had a baby/toddler theme.

I of course went to my local Dollar Tree to find the following:

Baskets
Shred
Theme related items
Curly Bows
Shrink Wrap

I spent a total of $35 at the Dollar Tree for these items.


Next, I placed the shred in the bottom of each basket, fluffing it with my hands in order to separate and add lift to the items I placed inside.

Then, I arranged the items, starting with the tallest/largest items in the back.


I worked the smaller items forward, creating a cascading effect.


This allows the items to be viewed as potential bidders are looking over each basket.

I arranged the curly ribbons in the front, weaving them around some of the items there.  This added volume and dimension to the baskets.


Now it was time to do the shrink wrap.

Dollar Tree always has this in stock, BUT, you may need to hunt for it.  Sometimes I've found it on the ends of the wrapping aisles, other times it's among the wrapping paper and ribbons.

Be diligent, and grab some extra so you have it on hand.


These packages come with these great big white ribbon pull bows.

I simply grabbed the skinny ribbons, pulled, and the bow "magically" formed.

I tied a knot in the back to the bow.  The tails of the skinny ribbon are used to tie the bow to your wrap, so I waited to cut those after I had attached the bow.


TIP:  Make sure to pull those skinny ribbons pretty tight, otherwise your bow will not be fluffy.  Don't pull too tight though or you will break the ribbon.  Take your time!


Next, I opened up the shrink wrap bag and placed the basket inside.  

TIP:  BE CAREFUL!  There is writing near the bottom of the bag, so make sure that that part is on the bottom of your basket.


From there, I created staggered gathers across the front of the basket.  


I used a heat gun from my craft stash, but you can use a hair dryer to "melt" the shrik wrap.

When shrinking the wrap on a basket, move the heat source continually over the wrap, about 6-8 inches away from it.  Don't hold the heat source steady, or the wrap with melt and pop open.

TIP:  Moving the heat source over the entire wrap, going back to the spots after you've done the whole thing, is the best way I've found to shrink the wrap without melting it.


I added the bows at the top, tying the skinny strips in a knot and then cutting the excess line.


I gathered the excess wrap at the top and snipped it off so that only about 6 inches was left up there.

This made the baskets look professional.


To complete each one, I added a "theme" title and as list of the contents of each basket.

This will help bidders understand the contents and the value of what's inside.

Making these types of baskets is an easy and fun way to donate to great causes.  It's also a great way to give a gift - a collection based on theme, or small gifts gathered into one larger gift experience.

Try it out.

Oh, and say a prayer...lots of them if you will.







© No Rules after 50. Made with love by The Dutch Lady Designs.