Tuesday, June 18, 2019

Dollar Tree Essential Oils "House"

I know I write and create A LOT with Dollar Tree purchases, but when there are so many inspirational ideas out these using these AFFORDABLE Dollar Tree products, I can't help myself.

Like this little number...


I found this sweet little shadow box house in the frames section of my local Dollar Tree.  

I saw so much potential that I bought it, brought it home, and got to work.


I started the project by using some leftover designer paper from a project that will posted to the blog this coming Saturday.

A bit of typeset that I "pieced" inside the little house.

I use the outside to create the angle, and then just kept cutting it down to fit inside.

I was able to get two strips for the right and left side of the house.


I took a smaller strip, used the top peak to create the exact fit there and then placed it inside and cut the bottom even.


It dry fit perfectly.

I grabbed a chip brush and my Matte Mod Podge and got to work adhering those strips inside the little house.


Once it dried, I took it to my workshop and cut down a scrap piece of lathe strip just a tad over the width of the inside.  

I used my stain to lightly add a bit of color to those strips.

I let them dry for a few hours.


Using my Gorilla Wood Glue, I rubbed some on the bottom of the inside, evenly from left to right.


I then put the piece of lathe strip in and pushed it down till it was tight.

Remember when I said that it was just a tad over the width measurement?  This is so it was "tight" when I pushed it in.


I added glue to the sides and back to the other piece of lathe strip and pushed it into the little house, just above the center part.  Again, the wider cut allowed it to fit snugly into place.

I let both of these dry.

Now...

I had this.


This is the absolute cutest essentials oils house.  

It stands on it's own, but could also be mounted on a wall with Command strips or a hanging bracket.

These little houses could also be used for tiny figurines, matchbox cars, little trinkets, or miniatures.

Total cost... $1.00.

I had the rest.

Stop by on Saturday to see what I do with that designer paper!




Saturday, June 15, 2019

"Jenga" Plant Stand

This post is sort of a funny one.

Because....

I made a plant stand from the "faux" Jenga game from the Dollar Tree.

Yep.  I did.  Here it is.


The Dollar Tree calls it the "Tumbling Tower Game" and it's played the same way.

However, the pieces are made out of pine wood and are perfect for little projects like this one.


They are about 1 7/8 inch long.


They are 5/8 inch wide.


So, here's how I did this...


I placed two pieces end to end and then took that measurement.

It was 3.75 inches.


I then ran two more pieces the opposite way, not touching each other, but touching the sides of the met pieces.  

It was almost 4.5 inches long.

Since I wanted it to be the same length - at 3.75 inches, I needed to cut those two pieces down at half the width of one piece.


This meant that I needed to but 3/8 inch of each one.

You can use a hacksaw for this.  The wood is soft and easy to cut.


Here are the pieces cut.  Nope, they weren't perfect, but it didn't matter.


Now, when I matched them all together, both lengths measured 3.75 inches in length.


I then took 4 more pieces of the game and marked them for the feet, but in reality, I didn't need to make those marks.

You'll see why in a bit.


Using my wonderful Gorilla Wood Glue, I started to glue it all together.

Yep...there are no nails in this baby!


Using a piece of wax paper underneath (so I don't glue it to my worktop), I butted the original pieces together.


Next, I glued the shortened pieces to the sides.  

The pieces are light, so I didn't need to clamp anything.


In order to stabilize the cross joint, I decided to add a whole piece across, secured with some added wood glue.  

This was the perfect way to add strength to those joints.


I let it dry, and then I propped it up on two pieces.  You can see them sticking out below the cross pieces.  They are not glued, just holding the cross up.


This is when I realized that I didn't need to make those marks because of the added height from the propped pieces gave it the boost it needed for the legs.


I added some glue to the ends of the cross pieces and butted the "leg" pieces against them.


After it dried, I removed the propping pieces and flipped it over so that that cross brace was now below.


Topped with a Dollar Tree candle holder (which will hold a plant eventually), it became a great Mid-century modern base.

Yahoo!


I decided to stain it for a darker look and used this "Combo Stain" that I made from combining several different stains that we already had.

I use it for a lot of staining projects.


It's a rich dark brown color.


The pine lapped up the stain and took on a great look.


Here it is stained and drying.

Doesn't it look great?

The total cost for 9 pieces of the game was 27 cents.

Score for rule breakers everywhere!






© No Rules after 50. Made with love by The Dutch Lady Designs.